Copyright Information

Thank you for stopping by my blog! I hope you enjoy the things that I create and share! I do have a copyright on my original creations (see logo on my sidebar below).
If you create and post a creations based off of mine, please refer (with a link) back to my blog. Please do not use my ideas for files, profit or for contests. Thank you!



My Craft Goals for 2015

My Goals for 2015:

1. Update my goals for 2016 in January of 2016 :)
2. Maximize my crafting time!
3. Keep plugging away at scrapbooking photos!!
4. Learn how to Heat Press!!
5. Have fun!


Showing posts with label DIsney/Pixar Toy Story. Show all posts
Showing posts with label DIsney/Pixar Toy Story. Show all posts

Monday, November 7, 2011

This Little Piggy Notepad (She's A Sassy Lady)


If you are looking for the Christmas Is For Kids Banner Blog Hop, please go HERE!


Hi, I am delighted to be a Guest Designer at She's A Sassy Lady today!!  
My niece just celebrated her 6th birthday.  She LOVES piggies!!  My gift to her is a day with Aunt Lori where we get pedicures and paint pottery (unless she chooses something different).  But I can't come empty handed to her birthday party, so I made her a piggie notepad and matching card.

I found this pig from Disney Pixar Toy Story.  I put the shadow layer on my gypsy at 4.18 inches and cut some out of white cardstock.
I cut out the another piggie at 4.29 (with the layer) for the cover.
I made the card the same size as the notebook cover.  I just welded two piggie shadow layers together for the card base and cut out a second piggie face.
Here is the card.
I wasn't sure how to bind my notebook without punching through the piggie's ears, so I used my Bind It All on a scrap piece of paper.
I put the scrap paper at the top of the notepad and centered it.

Then I used my Crop A Dile to punch three holes in the cover, back and the pages.
I trimmed the wires down to fit the note pad.

The trick is to flip the back cover over the front and poke the wires in.  Then bind it in the Bind It All. 

The back of the wires will be hidden in the back of the notepad.

I used pink stickles to add some sparkle.
I had to put a little ribbon on her too!!
Here are Sabryna's piggie cupcakes.
Here is Sabryna surrounded by her friends ~ such a cutie!!  As always, I am honored to be on Sheila's blog!!

Saturday, March 26, 2011

Disney/Pixar Blog Hop ~ Toy Story Layout


Welcome to the Much Anticipated Disney/Pixar Blog Hop!!!  You should have arrived from Tami's blog.  If not, please go to Shawn's BLOG to start at the beginning so you don't miss anything!!!

For those of you who don't know me, I am a HUGE Disney fan!!  We have been to Disney 4 times in the last 3 years and we are planning a Disney Cruise in October 2011!

I made a Toy Story layout from our September 2009 trip since Tanner dressed up as Buzz Lightyear for Mickey's Not-So-Scary Halloween Party.

I do have some Blog Candy detailed the end of my post!  Just in case you get lost along the way, here is the order of the hop!
Lori YOU ARE HERE!

I wanted to make a laser cut look layout.  I have three different versions of this basic layout saved on my Gypsy.  I have a tutorial HERE that shows how I made them.
I took one of my layouts and used it to create my 2-page layout.  For the first page, I welded the blackout shadow of Woody (3.62w x 6.54h) in the big open space on the left.  I welded he blackout shadow of "Toy Story" (4.42w x 3.15h) at the top.

For the right side, I flipped the page side to side and welded Buzz into to large open space (5.29w x 6.77h).  I cut out both pages in black.  If I were to do this layout again, I would not have cut them out in black because the bottom layer of the characters is black.

I copied the layers for "Toy Story" onto another layer.  I sized them to match the blackout shadow, then ungrouped them and separated by colors.

I did the same for Woody. 

Nine different colors for Woody!!!  I cut them out and then glued them on the black base with my Martha Stewart glue pen. 

I did use a black pen to color some of the highlights.
I put the pieces for Buzz on a 12 x 24 mat to size them then separate them.  I had enough pieces that I needed two 12 x 12 mats, so I grouped, copied and pasted half of them onto another layer.

Here is one page.

Cut out.

Here is the other page.

Cut out.  Notice all the tape ~ I did not want to take a chance at having to recut all my scraps and then recut the cuts!!  Eleven colors for Buzz!  This was a lot of work, but they look great!

After I put Buzz together, I used Glossy Accents on his helmet.

I outline the space first, then fill it in.
When it dries it is very shiny and is dimensional.

The layout had too much white space for me, so I added a couple of Army men.



I have been much better about journaling (yay for me) so I decided it would be fun to journal on the planet.

Here is a close up of "Toy Story".

Here is the two-page layout.  I got the background paper from WDW.  Tanner is dressed up as Buzz Lightyear in the pictures.
And here is my blog candy!  All you have to do to qualify is be or become a follower and leave me a comment on your favorite Disney Character or Disney memory!!

Thank you so much for stopping by!  Your next stop on the hop is LENA!  Enjoy!!